Valley Block WallsValley Block Walls

Block Wall Cost in Phoenix, AZ

Last updated: November 2026

Estimate your wall cost

Quotes for what looks like the same Phoenix block wall can land hundreds or thousands of dollars apart. This guide is a planning sheet for Valley homeowners in 2026: typical price ranges per linear foot and per project, the factors that move a bid, and what is different in Phoenix, Mesa, Gilbert, Chandler, Queen Creek, Surprise, Buckeye, Scottsdale, Peoria, and Glendale. Every dollar figure below is a typical range from a named public source, or simple multiplication of one of those ranges. It is not a quote. Your lot still sets the price.

Quick answer: what a block wall costs in Phoenix

For a straightforward 6-foot privacy wall in plain 6-inch concrete block (CMU), a Phoenix contractor publishes a 2026 installed range of about $60 to $95 per linear foot (New Era Masonry). That band assumes a level yard, typical Valley soil, workable equipment access, a concrete footing, rebar, required grout, a raw block finish, and ordinary cleanup. It generally does not include stucco, paint, decorative caps, gates, demolition, major grading, retaining conditions, or engineered plans.

Nationally, HomeGuide puts an installed cinder block wall at $60 to $240 per linear foot or $15 to $30 per square foot, and a 6-foot wall specifically at $90 to $180 per linear foot (HomeGuide). Use the local band to sanity-check a Valley bid, and the national band when a quote looks far outside either one.

Per linear foot versus per square foot. A 6-foot wall has 6 square feet of face for every foot of length. HomeGuide's $15 per square foot is about $90 per linear foot at 6 feet, and about $120 per linear foot at 8 feet. Compare quotes at the same height.

Typical ranges by wall type (Phoenix area, installed)

Wall type Typical range Source
Plain 6-inch CMU, 6 ft $60–$95 per linear foot New Era Masonry, 2026
8-inch CMU, 6–8 ft $85–$130 per linear foot New Era Masonry, 2026
Stuccoed and painted, 6 ft $85–$130 per linear foot New Era Masonry, 2026
Split-face or slump block, 6 ft $110–$180 per linear foot New Era Masonry, 2026
Engineered block retaining wall, 3–6 ft $120–$250 per linear foot New Era Masonry, 2026
6-ft block wall, national $90–$180 per linear foot HomeGuide
Installed block wall, national $15–$30 per square foot HomeGuide

Typical project totals

Per-foot prices are hard to picture until you multiply them by the wall you actually need. The rows below are straight multiplication of New Era Masonry's 2026 per-foot ranges. They leave out permits, gates, demolition, caliche, and slope. They are a check against a bid, not the bid.

Project How the range is built Typical range
60 ft, plain 6-inch CMU, 6 ft 60 × $60–$95 about $3,600–$5,700
100 ft, plain 6-inch CMU, 6 ft 100 × $60–$95 about $6,000–$9,500
150 ft, plain 6-inch CMU, 6 ft 150 × $60–$95 about $9,000–$14,250
100 ft, stuccoed and painted, 6 ft 100 × $85–$130 about $8,500–$13,000
80 ft, split-face or slump, 6 ft 80 × $110–$180 about $8,800–$14,400

New Era's own illustration sits inside the first row: at about $75 per linear foot, a 60-foot property-line wall is about $4,500 before permits, gates, demolition, or finish upgrades (New Era Masonry).

HomeGuide publishes national project totals that run wider, because they cover more heights and wall thicknesses (HomeGuide):

Length HomeGuide installed total
10 ft fence $600–$2,400
50 ft block fence $3,000–$9,000
100 ft block fence $6,000–$18,000

A short wall often costs more per foot than a long straight run, because the footing, mobilization, and cleanup are spread over fewer feet. A 40-foot side yard with a gate and no equipment access can outprice a longer alley wall on a per-foot basis.

If the wall holds back soil, stop using freestanding prices and use the retaining wall guide. If you are fixing a cracked or leaning wall, start with the block wall repair guide before you price a full replacement.

What moves the price

Height

Height changes both the block count and, in some cities, whether you need engineering. HomeGuide's national height bands are about $60 to $120 per linear foot at 4 feet, $90 to $180 at 6 feet, and $120 to $240 at 8 feet (HomeGuide). Locally, moving from 6-inch block at 6 feet ($60–$95) into 8-inch block at 6 to 8 feet ($85–$130) is the step most Valley bids take when the wall gets taller (New Era Masonry).

Each standard CMU course is about 8 inches. A 6-foot wall is 9 courses. Adding height is only cheaper than a new wall when the footing and the steel already in the wall can carry it. Scottsdale requires a permit to add height to fences over 3 feet, and engineered plans may be required (City of Scottsdale).

Footing

The footing is a large share of a block wall, and it disappears once the wall is up. HomeGuide describes typical block-wall foundations as about 1 to 3 feet deep, deeper for tall fences, with foundation trenching around $5 to $12 or more per linear foot, and more in rocky soil (HomeGuide). New Era's $60 to $95 band already assumes a proper footing, rebar, and grout on ordinary soil. A low bid that will not state footing width, depth, and rebar size is not the same wall as a bid that will.

Ask which cells get grout and how far apart the vertical rebar is. Those choices are difficult to see after the cap goes on, and they are what the wall has in a monsoon wind.

Stucco and paint

  • Stucco on a new wall: about $20 to $40 per linear foot, depending on height, how many sides are finished, prep, and texture (New Era Masonry). A stuccoed and painted 6-foot wall is published at $85 to $130 per linear foot all-in, which is the row to use when an HOA requires a finished face.
  • Paint or sealer on an existing wall: one Phoenix painter quotes about $1.00 to $2.50 per square foot for a full seal-and-paint job (Phoenix Painter Co.). On one side of a 6-foot wall, that is about $6 to $15 per linear foot.
  • Caps: a standard cap is often in the wall price. Decorative caps, a contrasting color, or stone veneer should be their own line.

HomeGuide's national plastering/stucco finish figure is about $3 to $4 per square foot (HomeGuide). That is a national finishing number, not a Phoenix installed-wall price. On a 6-foot face it is roughly $18 to $24 per linear foot per side, which sits near the local stucco add-on, but the scopes are not identical. Price the finish from the bid in front of you.

Caliche

Much of the Valley has caliche, a cemented soil layer that a trencher may not cut. New Era treats caliche and expansive soil as conditions that raise the project total above the base per-foot band (New Era Masonry). There is no honest single dollar add-on, because one lot is a thin crust and the next is a jackhammer trench. The useful question on every bid is: if you hit caliche, is the extra excavation included, capped, or billed as a change order?

Expansive clay is the other soil issue. It swells when monsoon water hits it and shrinks as it dries, and an undersized footing is a common reason a newer wall cracks. That shows up more often on repairs than on day-one prices. See block wall repair.

Permits

Permit fees are a separate line from the wall. Angi puts Phoenix-area building permits for retaining-wall work around $100 to $600, with room to go higher on a larger valuation (Angi Phoenix). HomeGuide's national permit range for a block wall is about $50 to $450 (HomeGuide). Neither figure is your city's fee schedule. The cost that actually surprises people is engineering, not the permit stamp, and that depends on height and whether the wall retains soil. The city-by-city rules are in the permit guide.

Arizona requires a licensed contractor when the job, including materials, is over $1,000, and for work that needs a permit. Check a license with the Arizona Registrar of Contractors.

HOA

An HOA can require a block type, stucco texture, paint color, cap, or column that the cheapest raw-block bid does not include. That is common in master-planned parts of Gilbert, Chandler, Queen Creek, Surprise, Peoria, and north Scottsdale. HOA approval does not replace a city permit. Get the written architectural approval before you sign, and hand the same finish spec to every bidder so the totals are comparable.

Demolition of an old wall

Tearing out a concrete wall runs about $5 to $16 per linear foot on HomeGuide, and a 50-foot wall is about $250 to $800 (HomeGuide, concrete removal). Haul-off is extra. The same guide lists dump fees around $30 to $65 per pickup load or $90 to $160 per ton, described as local landfill policies rather than a Phoenix rate. A grouted 6-foot block wall is heavy, and breaking out the footing costs more than knocking the block down and leaving the concrete in the ground. Ask which one the bid includes.

If only a section is damaged, a partial rebuild can cost more per foot than new construction because of demolition and tying into the old steel, while the shorter length keeps the project total down (New Era Masonry). Compare that with the ranges in the repair guide.

Slope

A freestanding wall on a gentle grade is usually a stepped footing, which adds layout time. A wall that holds soil back is a retaining wall: larger footing, drainage, and often an engineer. New Era prices engineered block retaining walls at about $120 to $250 per linear foot for 3- to 6-foot walls. Angi reports that sloped ground can raise retaining-wall labor by 50% or more, because the crew has to step the excavation or terrace the hill (Angi Phoenix). Use the retaining wall guide once the soil is higher on one side.

Gates

Gate openings need reinforced pilasters, and the gate is often a separate fabricator.

  • A standard double-panel metal RV gate runs about $1,900 to $3,400 installed, with the wall work priced separately (Desert Dreamco).
  • Cutting a new RV gate into an existing wall, including pilasters, footings, and patching, runs about $3,500 to $7,500 all-in for a manual gate in the East Valley (San Tan Block Walls).

Pedestrian gates cost less and vary with size. Quote the opening, the pilasters, and the gate as separate lines.

City notes

There is no trustworthy published price that belongs only to one Valley city. The ranges above are the planning numbers everywhere below. The notes are about height limits, permits, soil, lots, and HOAs, which are what change the bid. Confirm current rules in the permit guide before you build. Call Arizona 811 at least two working days before anyone digs.

Phoenix

The City of Phoenix requires a building permit for fences and walls over 3 feet. Structural calculations are required for fences over 7 feet, and for retaining walls over 3 feet measured from the top of the footing to the top of the wall. A fence on a retaining wall needs structural calculations at any height, and a combined height over 9 feet needs zoning approval first (City of Phoenix). Side and rear yards are generally limited to 6 feet, and required front yards to 3 feet (Residential Fences and Walls). Hillside and preservation areas are reviewed site by site, so a sloped lot in north Phoenix or near South Mountain can pick up engineering that a flat central-city side yard does not. Older neighborhoods often have shared property-line walls; budget demolition if the old wall has to come out. Browse Phoenix contractors.

Mesa

Mesa does not require a construction permit for a residential fence under 6 feet, and the wall still has to meet height and location rules (City of Mesa). A city masonry-wall handout lists about 3.5 feet in front yards and 6 feet in side and rear yards. Shared walls on a common lot line may need written approval from the neighbor and the HOA. Many central Mesa yards are tight, so access (a side gate versus an alley) moves the labor more than the city line does. Browse Mesa contractors.

Gilbert

Gilbert is widely reported to require a permit for fences over 3 feet, and for retaining walls over 4 feet or any wall with a surcharge. Confirm with Gilbert Development Services at 480-503-6700 before you rely on that. The cost issue in Gilbert is often the HOA, not the permit fee. Master-planned neighborhoods commonly specify stucco color, texture, and cap style, which pushes a raw-block price into the stuccoed band of $85 to $130 per linear foot. Browse Gilbert contractors.

Chandler

Chandler requires zoning clearance for every fence or wall, and a building permit when the fence is over 7 feet. Side and rear yards can go to 7 feet, which is taller than Phoenix's 6-foot side-yard limit, so a privacy wall here can legally be a taller, more expensive wall. A retaining wall needs a permit over 4 feet measured from the bottom of the footing to the top of the wall, and any fence sitting on a retaining wall needs a permit. Four-inch walls are not an approved retaining system (City of Chandler). The homeowner is responsible for locating property lines. Ocotillo and other planned areas add finish rules on top of the city clearance. Browse Chandler contractors.

Queen Creek

Queen Creek requires a fence and wall permit. Masonry has to follow a town standard detail (the town publishes 4-inch interlocking, 6-inch masonry, and 8-inch masonry details) or drawings from a registered engineer (Town of Queen Creek). Using the standard detail on a simple freestanding wall can avoid a custom engineering fee. Lots here are often newer and longer, and caliche shows up in footing bids. Pool barriers are their own rule: the town requires a barrier for every pool. Browse Queen Creek contractors.

Surprise

Surprise's local amendments exempt fences, other than pool barriers, that are not over 6 feet, and retaining walls that are not over 4 feet measured from the bottom of the footing to the top of the wall, unless the wall supports a surcharge (City of Surprise code amendments). Pool barriers are not exempt. Master-planned neighborhoods add HOA color and cap rules that a raw-block bid will miss. Browse Surprise contractors.

Buckeye

Buckeye publishes a residential fence and block wall checklist and a separate retaining-wall checklist rather than a single height number you can assume (City of Buckeye). Confirm the current packet with the city. The cost pattern on many Buckeye lots is length and access: acreage and new subdivisions mean longer runs, longer hose pulls, and footings that may hit caliche far from the street. A long plain wall can land toward the low end of the per-foot range and still be a large project total. Verrado and other planned communities add architectural review. Browse Buckeye contractors.

Scottsdale

Scottsdale requires a permit for fences over 3 feet, and walls under 3 feet still need a courtesy site-plan review. Adding height to a fence already over 3 feet needs a permit, and engineered plans may be required. Every retaining wall needs engineered plans (City of Scottsdale). North Scottsdale lots are where slope, boulder, and drainage lines show up in the bid. Many communities also run a strict architectural review for block, stucco, and cap, so the relevant price band is often the stuccoed or split-face row, not raw gray block. Browse Scottsdale contractors.

Peoria

Peoria publishes a residential fence or block wall checklist (the city's checklist 503) and expects you to confirm height and permit rules with Development Services (City of Peoria). Flat west Peoria side yards price more like the rest of the Valley. North Peoria and foothill edges pick up slope, and communities such as Vistancia add HOA finish standards. If the wall is part of a pool enclosure, Peoria's barrier rules are stricter than a normal fence: pools, spas, and hot tubs more than 18 inches deep need a barrier at least 60 inches tall (City of Peoria). Browse Peoria contractors.

Glendale

Glendale requires a permit for fences over 7 feet. Pool barriers and subdivision perimeter fences need a permit even when they are shorter (City of Glendale code amendments). Older central neighborhoods are full of shared property-line walls, so demolition, neighbor sign-off, and matching an existing stucco color are the usual extra lines. Arrowhead and other master-planned areas add HOA color rules on top of that. Browse Glendale contractors.

For Tempe, Goodyear, Avondale, and Cave Creek, use the permit guide and the city pages linked from the contractor directory.

Shared walls with a neighbor

In much of the Valley the wall between two back yards sits on the property line. Splitting the cost is common. Arizona has no statute that forces a neighbor to pay half of a new wall (Desert Dreamco). A wall on the line is generally treated as shared, so neither owner should tear it down or raise it without the other's agreement. CC&Rs sometimes assign the cost. If you split it, write down the scope, the contractor, each share, and when each person pays. Mesa notes that a wall on a shared line may need written approval from the HOA and the neighbor.

How long it takes

For a typical 60- to 100-foot privacy wall, plan on about five to ten business days from footing to cleanup when access and weather are ordinary (New Era Masonry). HOA review, permits, inspections, stucco cure time, and custom gates can add weeks. Ask for a schedule that starts at permit approval, not at the day you sign.

How to compare bids

  1. Measure the run. Note the height, any gates, and whether an old wall comes out.
  2. Check the HOA and the city limit first, so every contractor prices the same wall. Start with the permit guide.
  3. Get at least three written bids. Each one should list footing size, block type and size, rebar spacing, which cells are grouted, finish and which sides, caps, gates, demolition, caliche, permit, and cleanup.
  4. Compare those lines, not only the total. A low number can be a smaller footing or fewer grouted cells.

Questions to ask

  • What is your Arizona ROC license number, and are you insured?
  • How deep and wide is the footing, and how much rebar is in it?
  • How often is vertical rebar placed, and which cells get grout?
  • If you hit caliche, is that included or extra?
  • Who pulls the permit and schedules inspections?
  • Does the price include stucco and paint, and on which sides?
  • What does the warranty cover?

Frequently asked questions

How much does a 6-foot block wall cost per linear foot in Phoenix?

For a standard 6-foot wall in plain 6-inch block, a Phoenix masonry contractor publishes a 2026 typical range of about $60 to $95 per linear foot installed. Stucco and paint often land around $85 to $130 per linear foot, and split-face or slump block around $110 to $180. National HomeGuide data puts a 6-foot block fence at $90 to $180 per linear foot. These are typical ranges, not a quote.

How much does a block wall project cost in Phoenix, not just per foot?

Multiply a published per-foot range by the length, then add anything the per-foot price leaves out. Using a Phoenix contractor's 2026 range of $60 to $95 per linear foot, 60 feet of plain 6-foot wall is about $3,600 to $5,700, and 100 feet is about $6,000 to $9,500, before stucco, gates, demolition, or permits. The same contractor's example at about $75 per foot puts a 60-foot wall near $4,500. HomeGuide's national totals for a block fence run about $3,000 to $9,000 for 50 feet and $6,000 to $18,000 for 100 feet.

Do I need a permit for a block wall in the Phoenix area?

It depends on the city. Phoenix and Scottsdale require a building permit for fences and walls over 3 feet. Chandler's building-permit threshold is over 7 feet, with zoning clearance at any height, and Mesa does not require a construction permit for a residential fence under 6 feet. Queen Creek requires a permit and either a town standard wall detail or engineered drawings. Zoning height limits and HOA approval apply either way.

Does the price change between Phoenix, Mesa, Gilbert, and Scottsdale?

Nobody publishes a reliable price list that is different for each Valley city. The same per-foot ranges are the planning numbers. What changes the bid is the lot: caliche, slope, access, wall height the city allows, whether engineering is required, and HOA finish rules. Scottsdale and north Valley slopes, and strict architectural review, tend to add lines that a flat Mesa side yard may not have.

Does my neighbor have to pay half of a shared block wall?

Arizona has no statute that forces a neighbor to split the cost of a new wall. Sharing the cost is common, but it is voluntary unless your CC&Rs or a written agreement say otherwise. Put any split in writing before work starts.

How much does it cost to tear out an old block wall?

HomeGuide puts concrete wall demolition at about $5 to $16 per linear foot. A 50-foot wall on that page is about $250 to $800. Disposal is separate: HomeGuide lists about $30 to $65 per pickup load or $90 to $160 per ton under local landfill policies. Those are national ranges. Ask whether the old footing is broken out or left in the ground.

Why are my block wall quotes so far apart?

Bids often cover different work. One may include a deeper footing, more rebar, grouted cells, stucco on both sides, demolition, caliche, and the permit, while another prices a raw wall on easy soil. Ask each contractor to list footing size, block type, reinforcement, finish, permit, and cleanup so you can compare line by line.

Is it cheaper to raise my existing wall than to build a new one?

Often, if the existing footing and steel can carry the extra height. A contractor should check the footing size and whether the top cells are grouted with rebar before quoting. Some cities, including Scottsdale, require a permit and possibly engineered plans to add height. If the wall is cracked or leaning, compare a rebuild with the repair guide before you add courses to a failing wall.

Find a block wall contractor

Browse the Valley contractor list, or start with your city: Phoenix, Mesa, Chandler, Gilbert, Scottsdale, Peoria, Glendale, Surprise, Queen Creek, Buckeye, Tempe, Goodyear, Avondale, or Cave Creek.

Related guides: block wall repair in Phoenix, retaining walls, and permits by city.

Prices are typical ranges from the sources linked above, or multiplication of those ranges. They are not quotes. Costs change with materials, labor, and the lot. Get written bids.